20210629_124325
Abat-jour généré via https://lithophanemaker.com/Lamp Lithophane.html
Paramètres
CitationPictures: 20180712_075858.jpg,20180714_124030.jpg,20180713_083606.jpg,,
Height Control: Crop Photos Equally
Lithophane Resolution: 0.25
Top Diameter: 200
Bottom Diameter: 250
Number of Half-Waves: 0
Size of Waves: -10
Height: 225
Base Width and Height: 2
Overhang Angle: 45
Maximum Thickness: 2.4
Minimum Thickness: 0.3
Spacing Between Pictures: 10
Spacing Brightness: 0
Frame Options: Ledge Interface
Ledge Diameter: 27.6
Ledge Height: 25
Cylinder Diameter: 33.4
Cylinder and Ledge Thickness: 2.5
Spoke Thickness: 5.1 Semble très fragile !
Spoke Depth: 5 Semble très fragile !
Imprimante : HyperCube Evo by @Pepone ( https://www.lesimprimantes3d.fr/forum/topic/42265-vendu-hypercube-300x300x300-et-fournitures/ ) Buse de 0.3mm
Trancheur : Ultimaker Cura 4.9.1, Hauteur de couches : 0.24 mm, 192°C (plateau 60°C couche initial puis 0°C) Vitesse d’impression 80mm/s
Estimation : Filament 103.63m ~322g Durée : ~25h43min / Réalisé : ~26h57min
Filament : GEEETECH PLA 1.75 mm Blanc
Credit
Informations sur la photo
- Taken with SAMSUNG GT-S7560
- Focal Length 3.5 mm
- Exposure Time 1/120
- f Aperture f/2.6
- ISO Speed 100
Recommended Comments
Créer un compte ou se connecter pour commenter
Vous devez être membre afin de pouvoir déposer un commentaire
Créer un compte
Créez un compte sur notre communauté. C’est facile !
Créer un nouveau compteSe connecter
Vous avez déjà un compte ? Connectez-vous ici.
Connectez-vous maintenant