Aller au contenu

GO Print

End Gcode


lui05

Messages recommandés

bonjour

j'aurai besoin d'un petit conseil , voila j'ai mon end gcode qui fini par g28, mais après avoir fini l'impression de mon cube test l'extrudeur est venu se pose dessus et j'ai failli faire un massacre ,

je voudrais savoir par quelle commande finir mon end gcode

merci par avance

Lien vers le commentaire
Partager sur d’autres sites

Salut,

je l'ai pas encore testé mais je compte configurer celui-ci bientôt :

M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off 
G91 ;relative positioning
G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
G1 Y150 F5000 ;move completed part out
M84 ;steppers off
G90 ;absolute positioning
Lien vers le commentaire
Partager sur d’autres sites

;End GCode
M104 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)
G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
M84                         ;steppers off
G90                         ;absolute positioning
;{profile_string}

ça correspond a celui que j'ai , j'ai viré le G28 que j'avais,  merci pour le renseignement tout est rentré dans l'ordre

Lien vers le commentaire
Partager sur d’autres sites

j'ai ça 

M104 S0 ;extruder heater off

M140 S0 ;heated bed heater off

G91 ;relative positioning // Do not remove this line

G1 E-1.5 F300 ;retract the filament a bit before lifting the nozzle to release some of the pressure

G1 Z+1 E-5 ;move Z up a bit and retract filament even more

G90 ;absolute positioning

G1 X0 Y220 ;move X to the right and the bed to the front for easy object removal

M84 ;steppers off

M107 ; turn off fan

Lien vers le commentaire
Partager sur d’autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
×
×
  • Créer...