Creality Cloud - "Submit Print Settings Win a K2 Plus or Creality Hi 3D Printer"

[PPAC]

Salutation !

Genre de concours sur Creality Cloud, où il s'agit de publier des "Print Settings"

(fichiers projet .3mf fait avec "Creality Print" >= v5.1, et illustrés de photos du résultat d'impression avec une imprimante Creality)

 

pour gagner des Cuvacoins (Points échangeables dans la boutique-cadeau de Creality Cloud https://www.crealitycloud.com/gift-shop/mall )

 

et si on publie au moins 51 "Print Settings" valides (jugés par l'équipe de Creality Cloud),

on a alors une entrée pour participer à un "Lucky Draw" où les lots sont une "K2 Plus", une "Creality Hi" ou une "K1SE".

 

Date limite de participation 09/03/2025 UTC+8

 

Pour les détails

"Submit Print Settings Win a K2 Plus or Creality Hi 3D Printer",

https://www.crealitycloud.com/post-detail/678a0652f4c6400b75017643

Citation

Submit Print Settings Win a K2 Plus or Creality Hi 3D Printer

Creality Cloud

 

Upload your 3MF Print Settings to enter a lucky draw with prizes like the K2 Plus, K1 SE, Creality Hi , and bonus points! Publishing Print Settings for Creality Hi or K2 Plus models will unlock extra rewards.

Simply click "Join Now" at the bottom of this post to participate and upload your print settings.

Event Schedule

Upload Period: January 20, 2025 - March 9, 2025

Lucky Draw: March 14 - 16, 2025

Winners Announcement: March 19, 2025

Rewards

1 to 50 Print Settings: Earn 500 points for each eligible upload.
More than 50 Print Settings: Receive a lucky draw entry ticket.
Print Settings for K2 Plus or Creality Hi Models: Earn an extra 200 points each, up to 4000 points.
Lucky Draw Prizes: K2 Plus x1 |  Creality Hi x1 | K1 SE x1

   
 Rewards Details

1.To qualify for the lucky draw, participants need to upload 51 Print Settings. Once the judges have reviewed all entries, eligible participants will be notified through a system message. Three lucky winners will each receive one of the following: a K2 Plus, a Creality Hi , or a K1 SE. 

2.If you do not win a physical prizes in the lucky draw, Creality points will be awarded based on the total number of print settings you’ve uploaded.  Should you win a physical prize in the draw, you will not receive additional points as a duplicate reward. 

3.If any physical prizes remain unclaimed at the end of the lucky draw (due to participants opting out, preventing full prize distribution), Creality Cloud will prioritize awarding these prizes to participants with the highest upload counts. 

4.The draw will take place within the specified event timeframe. Participants who do not engage in the draw during this period will be deemed to have forfeited their eligibility.

 

Upload Guides & Tutorials

1.A Step-by-Step Guide to Uploading Your 3MF Print Settings: See tutorial here>> 

2.Create quality print file guide: View guide here>>  

Notes: Submit the print settings file via Creality Cloud web.

Dos and Don'ts

Example print settings 

 Baby Groot Sitting Waving Print Settings by Nancy Miller

1.3MF Files: 3MF Files:The file must be compatible with Creality printers.Must be exported using Creality Print version 5.1.0 or above.
2.Printability: Files must be tested through actual prints to ensure no quality issues before publishing.
Print Photos: Upload at least one real-life print photo; ideally, adding three photos from different angles is preferred.
3.Description: Include a minimum of 50 words, detailing the filament, parameters, and printing tips. Quality descriptions could earn additional rewards.
4.Fully Reviewed: Double-check parameters before upload to avoid using raw model settings.
5.No Repeated Uploads: Avoid reuploading others' 3MF files or duplicating files.
6.No Multiple Spliting: Do not split models into multiple configurations. Keep multiple parts in one file if possible.
7.No Deletion: the winning profile cannot be deleted after the end of the campaign, and the Platform reserves the right to withdraw the rewards obtained by the offender during the campaign period.
8.Multi-color Models: Do not upload a single color version of multi-color models unless required.
9.Undersize: Works that have a model size and printing time below the required standards are excluded from the premium print settings.

Criteria for Evaluating Top Print Settings

Comprehensive evaluation is mainly based on the integrity of the print configuration file, including no fewer than 3 high-quality real pictures and complete printing instructions.

Terms

1.Rules of the Lucky Draw: Engaging in any form of hacking methods to participate in the lucky draw is strictly prohibited. Upon discovery, the participant will be disqualified and any prizes won will be immediately revoked.
2.Campaign entries cannot be deleted: Winning Print Settings cannot be deleted once the campaign is over. In case of a violation of this rule, the Platform reserves the right to withdraw the rewards earned during the campaign and republish them.
3.Eligibility: After the event, we’ll review files for each model based on the submission time. You can manage your submissions on Personal Center > Print Settings.
4.No low-quality uploads: Users submitting poor-quality profiles will be disqualified, and Creality Cloud reserves the right to cancel or amend the event at any time.

How to Participate

Click "Join Now" at the bottom of the post to enter the event.

 

Q&A

Q1: How do you attend the event?

A1: Click "Join Now" to enroll. All Print Settings uploaded by your account during the event period count as entries.

Q2: Can I edit a submitted print profile?

A2: Yes, edit in Personal Center - Print Settings before the deadline. No changes allowed winning entries post-campaign.

Q3: Will I have to pay for shipping if I win a K2 Plus 3D printer in the lottery?

A3: Winners don't pay for international shipping; it's covered by the organizer. Local taxes, if any, are the winner's responsibility.

Q4: Can I use a non-Creality 3D printer for the event?

A4: No, this event requires Creality printers to ensure print profile accuracy and consistency.

Q5: How do you contact the event organizer?

A5: Email teamcloud@creality.com for event inquiries.

 

Bonne chance à tous les participants.