Aller au contenu

Filament ABS

darck_fighter

Membres
  • Compteur de contenus

    18
  • Inscrit(e) le

  • Dernière visite

Information

  • Imprimantes
    CR10 custom

Visiteurs récents du profil

Le bloc de visiteurs récents est désactivé et il n’est pas visible pour les autres utilisateurs.

Récompenses de darck_fighter

Apprentice

Apprentice (3/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Badges récents

0

Réputation sur la communauté

  1. la je viens de regarder la carte sd était en fat et non fat32 peut être que c'est ça
  2. J’ai juste retiré tout se qu’il y avait et mis le fichier firmwar.bin
  3. Non le seul truc à faire c’est rentrer la carte sd attendre et normalement marlin qu’on a configuré s’ouvre sauf que la sa me rouvres marlin que y’a de base sur la carte mère
  4. je viens de faire configurer mon firmware je l'ai mis sur une carte microsd comme indiquer chez btt et maintenant c'est la carte mère qui veut pas se flasher
  5. ok j'ai télécharger comme dans le tuto que j'ai envoyé au-dessus
  6. Ah ya un truc que j’ai pas bien fait alors tu n’aurais pas un tuto pour bien le faire ? merci
  7. bien sûr je suis plus a quelque minute près je fais sa depuis 4 jour
  8. oui je me suis tromper et j'ai essayer de compiler les fichier "frais" et ça marchais mais quand je prend pour ma machine sa fonctionne pas du coup j'ai essayer de reproduire ce tuto mais pour la ender 3 mais ça ne fonctionne pas non plus
  9. Bonjour, j'ai une cr10 Ma carte mère se faisait vielle, donc j'ai acheté une carte mère de chez bigtreetech pour profiter du 32bit, du bltouch et du capteur de fin de filament. J'ai démonté l'imprimante, je l'ai passé en standalone (suppression du boitier sur le côté pour mettre tout l'électronique en dessous de l'imprimante) j'ai recâblé l'imprimante avec la nouvelle carte. Ensuite j'ai installé Visual studio code, platformio, Auto build Marlin, marlin 2.0.X et bugfix 2.0.X Je mets les fichiés d'exemples de la cr10 avec la carte bigtreetech dans marlin. J'ouvre le projet dans platformio je change la carte ATmega2560 par STM32F103RC_btt_512K Je clique sur vérifier et ça ne marche pas et j'ai ces lignes de code Si quelqu'un pouvait m'aider pour mon problème ça m'aiderait énormément Merci pour tout vos conseilles. Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/ststm32/genericSTM32F103RC.html PLATFORM: ST STM32 (6.1.1) > STM32F103RC (48k RAM. 256k Flash) HARDWARE: STM32F103RCT6 72MHz, 48KB RAM, 512KB Flash DEBUG: Current (blackmagic) External (blackmagic, jlink, stlink) PACKAGES: - framework-arduinoststm32-maple 2.10000.200103 (1.0.0) - tool-stm32duino 1.0.2 - toolchain-gccarmnoneeabi 1.70201.0 (7.2.1) Converting Marlin.ino LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 31 compatible libraries Scanning dependencies... Dependency Graph |-- <SoftwareSerialM> 1.0.0 |-- <TMCStepper> 0.7.1 | |-- <SoftwareSerialM> 1.0.0 |-- <U8glib-HAL> 0.4.3 | |-- <Wire> 1.0 |-- <STM32ADC> 1.0 |-- <EEPROM> |-- <USBComposite for STM32F1> 0.91 |-- <Wire> 1.0 |-- <FreeRTOS701> |-- <Servo(STM32F1)> 1.1.2 Building in release mode Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduinoVariant\board.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduinoVariant\wirish\boards.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduinoVariant\wirish\boards_setup.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduinoVariant\wirish\start.S.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduinoVariant\wirish\start_c.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduinoVariant\wirish\syscalls.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\HardwareSerial.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\HardwareTimer.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\IPAddress.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\Print.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\Stream.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\WString.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\avr\dtostrf.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\cxxabi-compat.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\ext_interrupts.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\hooks.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\itoa.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\adc.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\adc_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\bkp_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\dac.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\dma.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\dma_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\exc.S.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\exti.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\exti_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\flash.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\fsmc_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\gpio.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\gpio_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\i2c.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\i2c_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\iwdg.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\nvic.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\pwr.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\rcc.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\rcc_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\spi.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\spi_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\stm32f1\performance\isrs.S.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\stm32f1\performance\vector_table.S.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\systick.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\timer.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\timer_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usart.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usart_f1.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usart_private.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\stm32f1\usb.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\stm32f1\usb_cdcacm.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\stm32f1\usb_reg_map.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\usb_lib\usb_core.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\usb_lib\usb_init.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\usb_lib\usb_mem.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\usb\usb_lib\usb_regs.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\libmaple\util.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\main.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\new.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\pwm.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\sdio.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\stm32f1\util_hooks.c.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\stm32f1\wiring_pulse_f1.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\stm32f1\wirish_debug.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\stm32f1\wirish_digital_f1.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\tone.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\usb_serial.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\wirish_analog.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\wirish_digital.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\wirish_math.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\wirish_shift.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\FrameworkArduino\wirish_time.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\HAL.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\HAL_SPI.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\MarlinSerial.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\SPI.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\Servo.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\SoftwareSerial.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\dogm\u8g_com_stm32duino_swspi.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\eeprom_bl24cxx.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\eeprom_flash.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\eeprom_if_iic.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\eeprom_sdcard.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\eeprom_wired.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\msc_sd.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\onboard_sd.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\sdio.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\tft\tft_fsmc.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\tft\tft_spi.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\tft\xpt2046.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\timers.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\STM32F1\watchdog.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\shared\HAL_spi_L6470.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\shared\eeprom_api.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\shared\eeprom_if_i2c.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\shared\eeprom_if_spi.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\shared\esp_wifi.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\HAL\shared\servo.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\MarlinCore.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\core\serial.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\core\utility.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\babystep.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\bedlevel\bedlevel.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\bedlevel\mbl\mesh_bed_leveling.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\controllerfan.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\e_parser.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\pause.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\feature\tmc_util.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\bedlevel\G42.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\bedlevel\M420.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\bedlevel\mbl\G29.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\bedlevel\mbl\M421.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\calibrate\G28.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\config\M200-M205.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\config\M220.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\config\M221.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\config\M301.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\config\M302.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\config\M92.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M108_M112_M410.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M111.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M120_M121.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M17_M18_M84.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M211.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M280.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M350_M351.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M400.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M80_M81.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M85.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M993_M994.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M997.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\M999.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\control\T.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\eeprom\M500-M504.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\advance\M900.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\controllerfan\M710.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\digipot\M907-M910.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\pause\G27.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\pause\M125.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\pause\M600.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\pause\M603.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\pause\M701_M702.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\trinamic\M122.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\trinamic\M569.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\trinamic\M906.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\feature\trinamic\M911-M914.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\gcode.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\gcode_d.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\geometry\G92.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\geometry\M206_M428.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\host\M110.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\host\M113.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\host\M114.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\host\M115.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\host\M118.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\host\M119.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\lcd\M0_M1.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\lcd\M117.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\lcd\M145.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\lcd\M300.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\lcd\M73.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\motion\G0_G1.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\motion\G4.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\motion\M290.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\parser.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\queue.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M1001.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M20.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M21_M22.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M23.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M24_M25.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M26.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M27.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M28_M29.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M30.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M32.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M33.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M34.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M524.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\sd\M928.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\stats\M31.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\stats\M75-M78.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M104_M109.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M105.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M106_M107.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M140_M190.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M141_M191.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M155.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\temp\M303.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\gcode\units\M82_M83.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\lcdprint_u8g.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\status_screen_DOGM.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\status_screen_lite_ST7920.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\u8g_dev_ssd1306_sh1106_128x64_I2C.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\u8g_dev_st7565_64128n_HAL.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\u8g_dev_st7920_128x64_HAL.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\u8g_dev_tft_upscale_from_128x64.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\u8g_dev_uc1701_mini12864_HAL.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\u8g_fontutf8.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\ultralcd_DOGM.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\dogm\ultralcd_st7920_u8glib_rrd_AVR.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\extui\ui_api.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\fontutils.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\lcdprint.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_advanced.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_bed_corners.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_bed_leveling.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_configuration.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_custom.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_filament.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_game.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_info.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_main.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_media.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_mixer.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_motion.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_probe_offset.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_temperature.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_tmc.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\menu\menu_tune.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\lcd\ultralcd.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\libs\buzzer.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\libs\crc16.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\libs\nozzle.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\libs\numtostr.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\libs\stopwatch.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\libs\vector_3.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\endstops.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\motion.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\planner.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\servo.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\settings.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\stepper.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\stepper\indirection.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\stepper\trinamic.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\temperature.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\module\tool_change.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\sd\Sd2Card.cpp.o Compiling .pio\build\STM32F103RC_btt_512K\src\src\sd\SdBaseFile.cpp.o In file included from Marlin\src\module\../inc/MarlinConfig.h:47:0, from Marlin\src\module\motion.h:31, from Marlin\src\module\motion.cpp:27: Marlin\src\module\motion.cpp:151:16: error: 'HOMING_FEEDRATE_XY' was not declared in this scope MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\motion.cpp:151:16: note: suggested alternative: 'HOMING_FEEDRATE_MM_M' MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\motion.cpp:151:48: error: 'HOMING_FEEDRATE_XY' was not declared in this scope MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\motion.cpp:151:48: note: suggested alternative: 'HOMING_FEEDRATE_MM_M' MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\motion.cpp:153:14: error: 'HOMING_FEEDRATE_Z' was not declared in this scope MMM_TO_MMS(HOMING_FEEDRATE_Z) ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\motion.cpp:153:14: note: suggested alternative: 'HOMING_FEEDRATE_MM_M' MMM_TO_MMS(HOMING_FEEDRATE_Z) ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\motion.cpp: In function 'void do_z_clearance(const float&, bool, bool, bool)': Marlin\src\module\motion.cpp:513:100: error: 'HOMING_FEEDRATE_Z' was not declared in this scope do_blocking_move_to_z(_MIN(zdest, Z_MAX_POS), MMM_TO_MMS(TERN(HAS_BED_PROBE, Z_PROBE_SPEED_FAST, HOMING_FEEDRATE_Z))); ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\../inc/../core/macros.h:196:29: note: in expansion of macro 'THIRD' #define ___TERN(P,V...) THIRD(P,V) // If first argument has a comma, A. Else B. ^~~~~ Marlin\src\module\../inc/../core/macros.h:195:29: note: in expansion of macro '___TERN' #define __TERN(T,V...) ___TERN(_CAT(_NO,T),V) // Prepend '_NO' to get '_NOT_0' or '_NOT_1' ^~~~~~~ Marlin\src\module\../inc/../core/macros.h:194:29: note: in expansion of macro '__TERN' #define _TERN(E,V...) __TERN(_CAT(T_,E),V) // Prepend 'T_' to get 'T_0' or 'T_1' ^~~~~~ Marlin\src\module\../inc/../core/macros.h:190:29: note: in expansion of macro '_TERN' #define TERN(O,A,B) _TERN(_ENA_1(O),B,A) // OPTION converted to '0' or '1' ^~~~~ Marlin\src\module\motion.cpp:513:60: note: in expansion of macro 'TERN' do_blocking_move_to_z(_MIN(zdest, Z_MAX_POS), MMM_TO_MMS(TERN(HAS_BED_PROBE, Z_PROBE_SPEED_FAST, HOMING_FEEDRATE_Z))); ^~~~ Marlin\src\module\motion.cpp:513:100: note: suggested alternative: 'HOMING_FEEDRATE_MM_M' do_blocking_move_to_z(_MIN(zdest, Z_MAX_POS), MMM_TO_MMS(TERN(HAS_BED_PROBE, Z_PROBE_SPEED_FAST, HOMING_FEEDRATE_Z))); ^ Marlin\src\module\../inc/../core/types.h:76:43: note: in definition of macro 'MMM_TO_MMS' #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f) ^~~~ Marlin\src\module\../inc/../core/macros.h:196:29: note: in expansion of macro 'THIRD' #define ___TERN(P,V...) THIRD(P,V) // If first argument has a comma, A. Else B. ^~~~~ Marlin\src\module\../inc/../core/macros.h:195:29: note: in expansion of macro '___TERN' #define __TERN(T,V...) ___TERN(_CAT(_NO,T),V) // Prepend '_NO' to get '_NOT_0' or '_NOT_1' ^~~~~~~ Marlin\src\module\../inc/../core/macros.h:194:29: note: in expansion of macro '__TERN' #define _TERN(E,V...) __TERN(_CAT(T_,E),V) // Prepend 'T_' to get 'T_0' or 'T_1' ^~~~~~ Marlin\src\module\../inc/../core/macros.h:190:29: note: in expansion of macro '_TERN' #define TERN(O,A,B) _TERN(_ENA_1(O),B,A) // OPTION converted to '0' or '1' ^~~~~ Marlin\src\module\motion.cpp:513:60: note: in expansion of macro 'TERN' do_blocking_move_to_z(_MIN(zdest, Z_MAX_POS), MMM_TO_MMS(TERN(HAS_BED_PROBE, Z_PROBE_SPEED_FAST, HOMING_FEEDRATE_Z))); ^~~~ *** [.pio\build\STM32F103RC_btt_512K\src\src\module\motion.cpp.o] Error 1 ==================================================================== [FAILED] Took 27.71 seconds ==================================================================== Environment Status Duration -------------------- -------- ------------ STM32F103RC_btt_512K FAILED 00:00:27.711 =============================================================== 1 failed, 0 succeeded in 00:00:27.711 ===============================================================The terminal process "C:\Users\noefu\.platformio\penv\Scripts\pio.exe 'run'" terminated with exit code: 1. Terminal will be reused by tasks, press any key to close it.
×
×
  • Créer...