Guillaume3D Posté(e) Février 6, 2020 Auteur Posté(e) Février 6, 2020 @fran6p Tu comprends quelque chose de ce charabia ? Révéler le texte masqué > Executing task in folder Marlin-2.0.x: C:\.platformio\penv\Scripts\platformio.exe debug < Processing LPC1769 (platform: https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.2.zip; board: nxp_lpc1769; framework: arduino) ------------------------------------------------------------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/nxplpc-arduino-lpc176x/nxp_lpc1769.html PLATFORM: NXP Arduino LPC176x 0.1.1 > NXP LPC1769 HARDWARE: LPC1769 120MHz, 31.97KB RAM, 464KB Flash DEBUG: Current (cmsis-dap) On-board (cmsis-dap) External (blackmagic, jlink) PACKAGES: toolchain-gccarmnoneeabi 1.80201.190214 (8.2.1), framework-arduino-lpc176x 0.2.2 Converting Marlin.ino LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ off, Compatibility ~ strict Found 6 compatible libraries Scanning dependencies... Dependency Graph |-- <Servo> 1.0.0 |-- <LiquidCrystal> 1.0.0 |-- <U8glib-HAL> 0.4.1 |-- <TMCStepper> 0.6.2 |-- <Adafruit NeoPixel> 1.3.0 |-- <SailfishLCD> Building in debug mode Unable to find destination disk (Autodetect Error) Please select it in platformio.ini using the upload_port keyword (https://docs.platformio.org/en/latest/projectconf/section_env_upload.html) or copy the firmware (.pio/build/LPC1769/firmware.bin) manually to the appropriate disk Compiling .pio\build\LPC1769\src\src\HAL\HAL_LPC1768\DebugMonitor.cpp.o Compiling .pio\build\LPC1769\src\src\HAL\HAL_LPC1768\HAL.cpp.o In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfigPre.h:37, from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../../Configuration.h:133: warning: "BOARD_BIGTREE_SKR_V1_4_TURBO" redefined #define BOARD_BIGTREE_SKR_V1_4_TURBO //Guillaume In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../core/boards.h:227: note: this is the location of the previous definition #define BOARD_BIGTREE_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed) In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfigPre.h:37, from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../../Configuration.h:133: warning: "BOARD_BIGTREE_SKR_V1_4_TURBO" redefined #define BOARD_BIGTREE_SKR_V1_4_TURBO //Guillaume In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../core/boards.h:227: note: this is the location of the previous definition #define BOARD_BIGTREE_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed) In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../core/boards.h:346:64: error: operator '==' has no right operand #define _MB_1(B) (defined(BOARD_##B) && MOTHERBOARD==BOARD_##B) ^ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:161:29: note: in expansion of macro '_MB_1' #define _DO_1(W,C,A) (_##W##_1(A)) ^ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:173:28: note: in expansion of macro '_DO_1' #define __DO_N(W,C,N,V...) _DO_##N(W,C,V) ^~~~ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:174:28: note: in expansion of macro '__DO_N' #define _DO_N(W,C,N,V...) __DO_N(W,C,N,V) ^~~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:175:28: note: in expansion of macro '_DO_N' #define DO(W,C,V...) _DO_N(W,C,NUM_ARGS(V),V) ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../core/boards.h:347:19: note: in expansion of macro 'DO' #define MB(V...) DO(MB,||,V) ^~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/pins.h:391:7: note: in expansion of macro 'MB' #elif MB(BIGTREE_SKR_V1_4_TURBO) ^~ In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:32, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/pins.h:622:6: error: #error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h" ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/pins.h:1298:8: error: #error "No E stepper plug left for Z2!" #error "No E stepper plug left for Z2!" ^~~~~ In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../core/boards.h:346:64: error: operator '==' has no right operand #define _MB_1(B) (defined(BOARD_##B) && MOTHERBOARD==BOARD_##B) ^ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:161:29: note: in expansion of macro '_MB_1' #define _DO_1(W,C,A) (_##W##_1(A)) ^ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:173:28: note: in expansion of macro '_DO_1' #define __DO_N(W,C,N,V...) _DO_##N(W,C,V) ^~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:174:28: note: in expansion of macro '__DO_N' #define _DO_N(W,C,N,V...) __DO_N(W,C,N,V) ^~~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:175:28: note: in expansion of macro '_DO_N' #define DO(W,C,V...) _DO_N(W,C,NUM_ARGS(V),V) ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/boards.h:347:19: note: in expansion of macro 'DO' #define MB(V...) DO(MB,||,V) ^~ Marlin\src\HAL\HAL_LPC1768\../../inc/../pins/pins.h:391:7: note: in expansion of macro 'MB' #elif MB(BIGTREE_SKR_V1_4_TURBO) ^~ In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:32, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../pins/pins.h:622:6: error: #error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h" ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../pins/pins.h:1298:8: error: #error "No E stepper plug left for Z2!" #error "No E stepper plug left for Z2!" ^~~~~ In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:38, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/SanityCheck.h:57:4: error: #error "MOTHERBOARD is required. Please update your configuration." #error "MOTHERBOARD is required. Please update your configuration." ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/SanityCheck.h:514:4: error: #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." ^~~~~ In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:38, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/SanityCheck.h:57:4: error: #error "MOTHERBOARD is required. Please update your configuration." #error "MOTHERBOARD is required. Please update your configuration." ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/SanityCheck.h:514:4: error: #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." ^~~~~ compilation terminated due to -fmax-errors=5. compilation terminated due to -fmax-errors=5. *** [.pio\build\LPC1769\src\src\HAL\HAL_LPC1768\DebugMonitor.cpp.o] Error 1 *** [.pio\build\LPC1769\src\src\HAL\HAL_LPC1768\HAL.cpp.o] Error 1 ==================================================== [FAILED] Took 5.44 seconds ==================================================== Environment Status Duration ---------------------------- -------- ------------ megaatmega2560 IGNORED megaatmega1280 IGNORED rambo IGNORED FYSETC_F6_13 IGNORED FYSETC_F6_14 IGNORED sanguino_atmega644p IGNORED sanguino_atmega1284p IGNORED melzi IGNORED melzi_optiboot IGNORED at90usb1286_cdc IGNORED at90usb1286_dfu IGNORED DUE IGNORED DUE_USB IGNORED DUE_debug IGNORED LPC1768 IGNORED LPC1769 FAILED 00:00:05.443 STM32F103RC IGNORED STM32F103RC_fysetc IGNORED STM32F103RC_bigtree IGNORED STM32F103RC_bigtree_USB IGNORED STM32F103RC_bigtree_512K IGNORED STM32F103RC_bigtree_512K_USB IGNORED STM32F103RE IGNORED STM32F103RE_bigtree IGNORED STM32F103RE_bigtree_USB IGNORED STM32F4 IGNORED STM32F7 IGNORED ARMED IGNORED STM32F103VE_GTM32 IGNORED STM32F103VE_longer IGNORED mks_robin_mini IGNORED mks_robin_nano IGNORED mks_robin IGNORED mks_robin_pro IGNORED mks_robin_lite IGNORED mks_robin_lite3 IGNORED jgaurora_a5s_a1 IGNORED STM32F103CB_malyan IGNORED chitu_f103 IGNORED STM32F401VE_STEVAL IGNORED FLYF407ZG IGNORED FYSETC_S6 IGNORED STM32F407VE_black IGNORED BIGTREE_SKR_PRO IGNORED BIGTREE_GTR_V1_0 IGNORED BIGTREE_BTT002 IGNORED teensy31 IGNORED teensy35 IGNORED esp32 IGNORED linux_native IGNORED SAMD51_grandcentral_m4 IGNORED rumba32_f446ve IGNORED mks_rumba32 IGNORED include_tree IGNORED =============================================== 1 failed, 0 succeeded in 00:00:05.443 =============================================== The terminal process terminated with exit code: 1 Terminal will be reused by tasks, press any key to close it. > Executing task in folder Marlin-2.0.x: C:\.platformio\penv\Scripts\platformio.exe debug < Processing LPC1769 (platform: https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.2.zip; board: nxp_lpc1769; framework: arduino) ------------------------------------------------------------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/nxplpc-arduino-lpc176x/nxp_lpc1769.html PLATFORM: NXP Arduino LPC176x 0.1.1 > NXP LPC1769 HARDWARE: LPC1769 120MHz, 31.97KB RAM, 464KB Flash DEBUG: Current (cmsis-dap) On-board (cmsis-dap) External (blackmagic, jlink) PACKAGES: toolchain-gccarmnoneeabi 1.80201.190214 (8.2.1), framework-arduino-lpc176x 0.2.2 Converting Marlin.ino LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ off, Compatibility ~ strict Found 6 compatible libraries Scanning dependencies... Dependency Graph |-- <Servo> 1.0.0 |-- <LiquidCrystal> 1.0.0 |-- <U8glib-HAL> 0.4.1 |-- <TMCStepper> 0.6.2 |-- <Adafruit NeoPixel> 1.3.0 |-- <SailfishLCD> Building in debug mode Unable to find destination disk (Autodetect Error) Please select it in platformio.ini using the upload_port keyword (https://docs.platformio.org/en/latest/projectconf/section_env_upload.html) or copy the firmware (.pio/build/LPC1769/firmware.bin) manually to the appropriate disk Compiling .pio\build\LPC1769\src\src\HAL\HAL_LPC1768\DebugMonitor.cpp.o Compiling .pio\build\LPC1769\src\src\HAL\HAL_LPC1768\HAL.cpp.o In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfigPre.h:37, from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../../Configuration.h:133: warning: "BOARD_BIGTREE_SKR_V1_4_TURBO" redefined #define BOARD_BIGTREE_SKR_V1_4_TURBO //Guillaume In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../core/boards.h:227: note: this is the location of the previous definition #define BOARD_BIGTREE_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed) In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfigPre.h:37, from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../../Configuration.h:133: warning: "BOARD_BIGTREE_SKR_V1_4_TURBO" redefined #define BOARD_BIGTREE_SKR_V1_4_TURBO //Guillaume In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../core/boards.h:227: note: this is the location of the previous definition #define BOARD_BIGTREE_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed) In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../core/boards.h:346:64: error: operator '==' has no right operand #define _MB_1(B) (defined(BOARD_##B) && MOTHERBOARD==BOARD_##B) ^ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:161:29: note: in expansion of macro '_MB_1' #define _DO_1(W,C,A) (_##W##_1(A)) ^ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:173:28: note: in expansion of macro '_DO_1' #define __DO_N(W,C,N,V...) _DO_##N(W,C,V) ^~~~ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:174:28: note: in expansion of macro '__DO_N' #define _DO_N(W,C,N,V...) __DO_N(W,C,N,V) ^~~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/macros.h:175:28: note: in expansion of macro '_DO_N' #define DO(W,C,V...) _DO_N(W,C,NUM_ARGS(V),V) ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../core/boards.h:347:19: note: in expansion of macro 'DO' #define MB(V...) DO(MB,||,V) ^~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/pins.h:391:7: note: in expansion of macro 'MB' #elif MB(BIGTREE_SKR_V1_4_TURBO) ^~ In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:32, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/pins.h:622:6: error: #error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h" ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/pins.h:1298:8: error: #error "No E stepper plug left for Z2!" #error "No E stepper plug left for Z2!" ^~~~~ In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfigPre.h:35, from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:28, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../core/boards.h:346:64: error: operator '==' has no right operand #define _MB_1(B) (defined(BOARD_##B) && MOTHERBOARD==BOARD_##B) ^ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:161:29: note: in expansion of macro '_MB_1' #define _DO_1(W,C,A) (_##W##_1(A)) ^ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:173:28: note: in expansion of macro '_DO_1' #define __DO_N(W,C,N,V...) _DO_##N(W,C,V) ^~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:174:28: note: in expansion of macro '__DO_N' #define _DO_N(W,C,N,V...) __DO_N(W,C,N,V) ^~~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/macros.h:175:28: note: in expansion of macro '_DO_N' #define DO(W,C,V...) _DO_N(W,C,NUM_ARGS(V),V) ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../core/boards.h:347:19: note: in expansion of macro 'DO' #define MB(V...) DO(MB,||,V) ^~ Marlin\src\HAL\HAL_LPC1768\../../inc/../pins/pins.h:391:7: note: in expansion of macro 'MB' #elif MB(BIGTREE_SKR_V1_4_TURBO) ^~ In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:32, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/../pins/pins.h:622:6: error: #error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h" ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/../pins/pins.h:1298:8: error: #error "No E stepper plug left for Z2!" #error "No E stepper plug left for Z2!" ^~~~~ In file included from Marlin\src\HAL\HAL_LPC1768\../../inc/MarlinConfig.h:38, from Marlin\src\HAL\HAL_LPC1768\HAL.cpp:25: Marlin\src\HAL\HAL_LPC1768\../../inc/SanityCheck.h:57:4: error: #error "MOTHERBOARD is required. Please update your configuration." #error "MOTHERBOARD is required. Please update your configuration." ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../inc/SanityCheck.h:514:4: error: #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." ^~~~~ compilation terminated due to -fmax-errors=5. In file included from Marlin\src\HAL\HAL_LPC1768\../../core/../inc/MarlinConfig.h:38, from Marlin\src\HAL\HAL_LPC1768\../../core/serial.h:24, from Marlin\src\HAL\HAL_LPC1768\DebugMonitor.cpp:26: Marlin\src\HAL\HAL_LPC1768\../../core/../inc/SanityCheck.h:57:4: error: #error "MOTHERBOARD is required. Please update your configuration." #error "MOTHERBOARD is required. Please update your configuration." ^~~~~ Marlin\src\HAL\HAL_LPC1768\../../core/../inc/SanityCheck.h:514:4: error: #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2." ^~~~~ compilation terminated due to -fmax-errors=5. *** [.pio\build\LPC1769\src\src\HAL\HAL_LPC1768\DebugMonitor.cpp.o] Error 1 *** [.pio\build\LPC1769\src\src\HAL\HAL_LPC1768\HAL.cpp.o] Error 1 ==================================================== [FAILED] Took 6.02 seconds ==================================================== Environment Status Duration ---------------------------- -------- ------------ megaatmega2560 IGNORED megaatmega1280 IGNORED rambo IGNORED FYSETC_F6_13 IGNORED FYSETC_F6_14 IGNORED sanguino_atmega644p IGNORED sanguino_atmega1284p IGNORED melzi IGNORED melzi_optiboot IGNORED at90usb1286_cdc IGNORED at90usb1286_dfu IGNORED DUE IGNORED DUE_USB IGNORED DUE_debug IGNORED LPC1768 IGNORED LPC1769 FAILED 00:00:06.019 STM32F103RC IGNORED STM32F103RC_fysetc IGNORED STM32F103RC_bigtree IGNORED STM32F103RC_bigtree_USB IGNORED STM32F103RC_bigtree_512K IGNORED STM32F103RC_bigtree_512K_USB IGNORED STM32F103RE IGNORED STM32F103RE_bigtree IGNORED STM32F103RE_bigtree_USB IGNORED STM32F4 IGNORED STM32F7 IGNORED ARMED IGNORED STM32F103VE_GTM32 IGNORED STM32F103VE_longer IGNORED mks_robin_mini IGNORED mks_robin_nano IGNORED mks_robin IGNORED mks_robin_pro IGNORED mks_robin_lite IGNORED mks_robin_lite3 IGNORED jgaurora_a5s_a1 IGNORED STM32F103CB_malyan IGNORED chitu_f103 IGNORED STM32F401VE_STEVAL IGNORED FLYF407ZG IGNORED FYSETC_S6 IGNORED STM32F407VE_black IGNORED BIGTREE_SKR_PRO IGNORED BIGTREE_GTR_V1_0 IGNORED BIGTREE_BTT002 IGNORED teensy31 IGNORED teensy35 IGNORED esp32 IGNORED linux_native IGNORED SAMD51_grandcentral_m4 IGNORED rumba32_f446ve IGNORED mks_rumba32 IGNORED include_tree IGNORED =============================================== 1 failed, 0 succeeded in 00:00:06.019 =============================================== The terminal process terminated with exit code: 1 Terminal will be reused by tasks, press any key to close it.
fran6p Posté(e) Février 7, 2020 Posté(e) Février 7, 2020 Le 06/02/2020 at 19:40, Guillaume3D a dit : Tu comprends quelque chose de ce charabia ? Dérouler Réponse courte: 1
Guillaume3D Posté(e) Février 10, 2020 Auteur Posté(e) Février 10, 2020 (modifié) Après pas mal de déboires, j'ai réussis à avoir quelque chose. J'ai du télécharger la version github de Marlin publié par BigreeTech car la version officiel de marlin n'avait pas inclus correctement la SKR 1.4 TT. D'ailleur la versions de marlin pour la SKR 1.4 Turbo est sortie qu'il n'y a de très peu de temps Comme je suis un Dieu vivant, pour l'instant tout se compile et tout à l'air de fonctionner. Je viens de commander la carte (SKR v1.4 Turbo 120mhz) et je l'attend pour faire mes premiers tests Modifié (le) Février 10, 2020 par Guillaume3D 1 1
keflo Posté(e) Mai 30, 2020 Posté(e) Mai 30, 2020 Le 10/02/2020 at 17:15, Guillaume3D a dit : Après pas mal de déboires, j'ai réussis à avoir quelque chose. J'ai du télécharger la version github de Marlin publié par BigreeTech car la version officiel de marlin n'avait pas inclus correctement la SKR 1.4 TT. D'ailleur la versions de marlin pour la SKR 1.4 Turbo est sortie qu'il n'y a de très peu de temps Comme je suis un Dieu vivant, pour l'instant tout se compile et tout à l'air de fonctionner. Je viens de commander la carte (SKR v1.4 Turbo 120mhz) et je l'attend pour faire mes premiers tests Dérouler bonjour, tu as reçu ta carte ? Tu peux nous dire si tout est ok?
Guillaume3D Posté(e) Mai 30, 2020 Auteur Posté(e) Mai 30, 2020 Le 30/05/2020 at 14:59, keflo a dit : bonjour, tu as reçu ta carte ? Tu peux nous dire si tout est ok? Dérouler Oui nickel
Ne0tuX Posté(e) Juin 28, 2020 Posté(e) Juin 28, 2020 (modifié) Bonjour, j'espère ne pas arriver trop tard et que les souvenirs de la config des TMC 2208 sur une BTT SKR 1.4 sont encore frais. J'en ai installé des DIY V3 sur ma Ender 3, sous Marlin 2.0 et les 4 moteurs fonctionnent comme attendu MAIS j'ai le message"TMC connection error" qui s'affiche à l'écran. Par ailleurs le code M122 laisse penser que la com UART ne se fait pas du tout : Driver registers: X 0x00:00:00:00 Bad response! Y 0x00:00:00:00 Bad response! Z 0x00:00:00:00 Bad response! E 0x00:00:00:00 Bad response! Testing X connection... Error: All LOW Testing Y connection... Error: All LOW Testing Z connection... Error: All LOW Testing E connection... Error: All LOW Voici la configuration de la carte : J'ai également réalisé la soudure en J2 (first method). La carte est alimentée en VDD et non USB. Je dois dire qu'un détail doit m’échapper mais impossible de mettre la main dessus. Je suis preneur de toute idée qui pourrait débloquer ma situation. Si besoin, j'ai joint ma config Marlin. Configuration.hUnavailable Configuration_adv.hUnavailable Modifié (le) Juin 28, 2020 par Ne0tuX
Ne0tuX Posté(e) Juin 28, 2020 Posté(e) Juin 28, 2020 Problème résolu en soudant non pas via la méthode 1 ni la méthode 2, mais en soudant les 3 pins ensemble + jumper sur les pins PDN/UART sur le dessus des drivers. Si ça ne dérange pas je laisse mon message pour future référence. 1
Oze Posté(e) Juin 28, 2020 Posté(e) Juin 28, 2020 (modifié) Tiens @Ne0tuX je suis exactement dans le même cas que toi ! Je me retrouve avec le défaut TMC connection error ... aurais tu une photo de la soudure que tu a faites s'il te plait ? EDIT c'est bon j'ai suivi ton idée de connecté via la partie haute du driver les deux pins UART via un jumper + soudure first méthod et les X et Y sont passé en connexion OK ! je m'en vais faire de même pour le Z et le E et j'aurais bien avancé ! Modifié (le) Juin 28, 2020 par Oze
Oze Posté(e) Juin 29, 2020 Posté(e) Juin 29, 2020 Tiens voilà un nouveau problème ! maintenant que les TMC fonctionne sous UART et qu'il n'y a plus de défaut à l'écran c'est le déplacement des axes qui est étrange... Avant soudure comme le modèle 1 et ajout du jumper pour lié les deux pins du haut du driver quand je demandais un déplacement de 10mm la machine en faisait 20/25.. Mais maintenant quand je demande 10mm elle se déplace de 2mm Pourtant sous config.h j'ai bien 80 de default_axis_steps_per_unit et je ne sais pas si cela a un rapport mais sous config_adv.h dans trinamic_config mais drivers sont réglé comme dans la vidéo de Edward Braiman donc 16 microsteps et X/Y_current 700 Je veux bien essayer d'augmenter la valeur de steps_per_unit x4 mais je ne suis pas sur que ce soit la solution... il doit y avoir un problème car 80 pour le X et le Y sont des valeurs "standard" sur de nombreuses machines Une idée ?
.thumb.jpg.8e4f3c7962529d5b54999ca8667a07c0.jpg)
Messages recommandés
Créer un compte ou se connecter pour commenter
Vous devez être membre afin de pouvoir déposer un commentaire
Créer un compte
Créez un compte sur notre communauté. C’est facile !
Créer un nouveau compteSe connecter
Vous avez déjà un compte ? Connectez-vous ici.
Connectez-vous maintenant